Long Range RWD Model 3 with 363-Mile Range for $34,990

Tesla has brought back the Model 3 Long Range Rear-Wheel Drive variant, which starts at $42,490. However, due to the batteries in the Long Range model, it qualifies for the $7,500 federal EV rebate. This makes this new model the cheapest model in Tesla’s lineup after the federal rebate that comes off at the point of sale.

After the federal rebate, this model is $34,990, exactly $4,000 less than the standard RWD model with the smaller LFP battery.

Improved Range

The Long Range RWD variant boasts a range of 363mi (vs 341mi for the AWD, and 272mi for the regular RWD), and a 0-60mph of 4.9sec (vs 4.2sec for the AWD). This makes the new Long Range RWD Model 3 Tesla’s longest-range economic vehicle (Model 3 / Model Y). The Model S AWD boasts an impressive 402-mile EPA estimate.

Other than the lack of a front motor for handling in rough or slippery terrain, or having a faster 0-60, the Long Range RWD is a fantastic option for most people.

It’s worth noting that only the Long Range AWD model can unlock Tesla’s Acceleration Boost, which increases power and reduces the vehicle’s 0-60 times by about half a second.

Availability

For now, the Model 3 Long Range RWD model is only available in the United States, with no availability in Canada.

As FSD V12.4.3 continues to get released to more vehicles, Elon Musk has posted that FSD V12.5 is already in testing and will include several key features.

The improvements in v12.5 are supposed to focus on rarer, more complex situations and vehicle-to-fleet communication. Tesla’s Autopilot lead, Ashok Elluswamy, also mentioned that FSD would gain the ability to go in reverse around this time.

Merge City & Highway Stacks

FSD v12 has been a multi-stack setup so far, with a city-streets stack that is end-to-end, and an older highway stack that was carried over from v11. FSD v12.5 will once again merge the city/highway stacks according to Musk, who confirmed the feature yesterday. That means that there will no longer be an implicit highway stack.

This could cause some regressions during highway driving, similar to the ones we experienced when Tesla first merged highway and city stacks back in FSD v11. Ultimately, when the issues were ironed out, we ended up with a smoother and better Autopilot experience on the highway. When FSD v12.5 rolls around, we may see some similar issues but expect FSD v12.5 to do to highways what v12 did for city driving.

Vehicle-to-Fleet Communications

Tesla’s FSD relies heavily upon maps, with the mapping information designating routing and lane changes. When vehicles encounter difficulties, they are unable to communicate that back to the rest of the fleet. This results in every vehicle encountering the same problem. With FSD V12.5, vehicles will be able to communicate road closures or other obstacles back to the rest of the fleet in real-time. This will turn FSD into software that’s constantly improving as the fleet gathers more data, instead of having to wait for a software update.

Cybertruck Finally Gets FSD

In a recent post on X, Musk also confirmed that V12.5 will finally bring FSD to the Cybertruck. Currently, all Cybertrucks only have access to Traffic Aware Cruise Control (TACC). Autopilot and FSD capabilities should arrive alongside all the other features.

Actually Smart Summon

Musk has talked quite a bit about Actually Smart Summon. With FSD 12.5, the new vision-based summon may finally be released. This will introduce Smart Summon capabilities to vision-only cars for the first time. However, it’s expected to be a drastic improvement for all vehicles in similar ways to the new Autopark. The new summon has been tied to the ability to move the vehicle in reverse by Tesla’s Autopilot lead, so expect either both of them to arrive in FSD 12.5, or be held off for a later release.

Release Date

Musk originally mentioned that FSD V12.5 would be released in late June, however, there were several delays with FSD 12.4 and that time frame has now come and gone. FSD 12.4 was initially released in May 2024, but it went through several lengthy revisions before it was introduced to public testers. Going by that time frame, it appears that FSD 12.5 was expected to be released about 4-6 weeks after FSD 12.4. If FSD 12.4.3 is finally got a good spot, we could see FSD 12.5 become available in the next 4-6 weeks or about late August.

Tesla’s Sentry Mode keeps the vehicle’s cameras active and various sensors ready to record if there is any activity that the vehicle identifies as suspicious.

Sentry Mode is like a 24/7 home security system with 360-degree cameras for your Tesla. In addition to recording from the vehicle’s various cameras, Tesla recently added the ability for the vehicle to alert you when there is suspicious activity.

The vehicle owners will receive a notification from the Tesla app with a short video clip of the activity. However, not all Sentry Mode events result in a notification or video being sent. So, let’s dig into how Sentry Mode’s mobile notifications work.

How to Enable Video Notifications

You’ll need to ensure that Sentry Mode and Dashcam are enabled to receive video notifications as they’re both disabled by default due to the amount of power Sentry Mode uses.

You’ll also need to be subscribed to Tesla’s Premium Connectivity and have a USB drive inserted into the glovebox USB port (or middle console in older vehicles). By default, all Teslas from 2020 and later are equipped with a pre-formatted USB flash drive that supports Sentry Mode recordings.

While “Camera-Based Detection” doesn’t need to be enabled to receive video notifications, we recommend enabling it if available so that Sentry Mode captures all events involving your vehicle.

Sentry Mode video notifications are currently limited to the iPhone and iPad, but there will likely be Android support in the future.

Video Notifications Details

Ok. Is this new Sentry Mode alarm mobile notification with video new to me or everyone? pic.twitter.com/vL5UxfjO4Z

— TesLatino (@TesLatino) May 14, 2024

Each video notification is 60 seconds long. You can tap on your notification to view the video directly, or also go into the app to view recent video notifications. The video notifications are located under Security & Drivers > Sentry Mode Recording Previews.

In addition to receiving a video of the Sentry event, Tesla will also save the same one-minute notification video to your vehicle’s USB drive in addition to the other Sentry Mode footage.

Tesla has confirmed that all preview videos are end-to-end encrypted and can’t be accessed by Tesla.

What Triggers a Video Notification

While Sentry Mode will record quite a few events, and display them for the user when they return, only certain events will trigger the threshold for mobile notifications.

Tesla describes two specific parameters that will trigger a video notification:

• the vehicle alarm is triggered, or

• a threat to the vehicle is detected that is caused by sudden jerky motions

Sentry Mode records various other events such as if a person walks by very closely to your vehicle. This may cause the vehicle to pulse its headlights or display a message on the screen, but it will not result in a notification being sent to the app.

Regional Availability

Sentry Mode’s mobile notifications are limited to certain regions due to local laws. The feature is available in North America, Australia, and most parts of Asia.

Who Receives Video Notifications

It’s important to keep in mind that anything that triggers Sentry Mode’s mobile notification threshold will immediately alert all mobile app keyholders of the vehicle. This does not include guest drivers but does include other Tesla account holders with whom you may have shared vehicle access.

Commercial Alerts

If your vehicle is part of a commercial fleet, it will also notify the fleet managers on the Tesla Fleet Dashboard, and the 1-minute clip will be viewable through the Fleet Dashboard. Full-length clips will still need to be accessed on a per-vehicle basis, even through the Commercial Fleet API.